Catalogue
A spare press bag for the Speidel hydropress. Available in 20, 40 and 90 litre sizes.
A complete replacement for the bladder of the Speidel hydropress. Available in 3 sizes: 20, 40 and 90 litres.
Replacement Speidel ball valve (BSP) suitable for 20 litre, 40 litre and 90 litre hydropresses - male / male ends.
A spare splash cover to minimise mess when using the Speidel hydropress. Available in 20 and 40 litre sizes.
A single acacia wood rack for use with the pack press.
A complete replacement of the cross beam section of our 12 litre press, including both the ball bearing and split pin.
A replacement pawl for the 20 and 36 Litre Cross Beam Press ratchet mechanisms.
A spare juice collection tray compatible with both our 20 and 36 Litre Cross Beam presses. Made from food grade stainless steel.
A replacement bearing plate, complete with solid beechwood block and brass disc. Compatible with both our 20 and 36 Litre Cross Bream presses.
A complete pressure plate assembly compatible with both our 20 and 36 Litre Cross Beam Presses. Includes carry handles for ease of transport and positioning.
A complete replacement for the spindle mechanism in both our 20 and 36 Litre Cross Beam presses, so this will work with both.
Speidel touch up paint to cover any chips or scrapes and maintain a clean appearance. All paint supplied is food safe.
A replacement pawl for the ratchet mechanism of the Pack Press.
What's included? A replacement pressure plate for our 12 Litre Cross Beam Press. Made entirely from solid, sustainably sourced beechwood.
A replacement pressure disc compatible with both our 20 and 36 Litre Cross Beam Presses. As their press cages have the same diameter the disc is a perfect for for both.
A replacement leg for our 9 Litre Spindle Press. Made from durable cast iron.
A complete replacement pressing cage for the 12 Litre Cross Beam Press. Constructed from sustainably sourced beechwood staved and girded by robust cast iron hoops.
A pressing cage for our 9 Litre Spindle Press. The cage is made from sustainably sourced beechwood slats and is girded by solid cast iron hoops.
A complete replacement base with a threaded spindle compatible with our 9 Litre Spindle Press. Constructed entirely from durable cast iron and stainless steel. Please note legs are not included but are available separately if required.
A replacement top pressure block for the 9 Litre Spindle Press. Made from durable cast iron and solid wood.
Armature that fits both the 20 & 40 litre Speidel Hydropresses
A replacement former for the Pack Press. Used to build the pomace cheeses that are sandwiched between acacia racks to be pressed.
A replacement brass disc that pairs with the bearing plate of our 20 and 36 Litre Cross Beam presses to accept the spindle mechanism.
A complete replacement pressing cage for our 20 Litre Cross Beam Press. Constructed from solid, sustainably sourced beechwood staved and girded by robust cast iron hoops.
A pair of pressure plates to fit our 9 Litre Spindle press. The two halves are assembled under the top block to form the pressing mechanism and juice is extracted.
A replacement press cage for our 4.5 Litre Worktop Press. Made entirely from high quality stainless steel.
A replacement bearing plate complete with solid brass insert to accept the spindle mechanism of our Pack Press.
A replacement juice collection tray, compatible with our Pack Press. Made from food grade stainless steel.
A replacement handle compatible with both our 20 and 36 Litre Cross Beam presses. Used to help operate the pressing mechanism.
A 50cm x 50cm solid acacia wood rack for use with the rack and cloth press. These racks are extremely durable and are built to last. Sourced from FSC approved forests.
A replacement tightening nut compatible with the 20 litre and 40 litre Speidel hydropresses. Used to secure the lid and keep it in place while pressing.
A splash sleeve compatible with the 4.5 Litre Worktop Press. This minimises the mess caused when pressing and will keep the juice from spilling!
A complete replacement base and spindle for our 12 Litre Stainless Steel Press. Legs are also included as part of the base.
A set of 2 additional spacing blocks for the 9 Litre Spindle Press. Useful for additional leverage and pressing power if required.
A replacement for the spindle component of the Pack Press.
A replacement cage for our 12 Litre Stainless Steel Press. Made from sustainably sourced beechwood staves and girded by stainless steel hoops.
A replacement top beam component compatible with both our 20 and 36 Litre Cross Beam presses.
A replacement split pin for the 12 Litre Cross Beam Press.
A replacement juice catchment tray for our 4.5 Litre Worktop Press.
A replacement collar for our 9 Litre Spindle Press. Made from durable cast iron.
A replacement handle compatible with our 12 Litre Cross Beam Press.
A replacement base plate for the 12 Litre Cross Beam Press. Constructed from robust cast iron. Please note legs are not included but are available separately if required.
A replacement cross beam and rod, forming part of the pressing mechanism of our 4.5 Litre Worktop Press. Made from stainless steel and solid brass.
A replacement pressure block for the Pack Press. This is a solid, heavy duty wooden plate made from sustainably sourced beech.
A complete replacement pressing cage for our 36 Litre Cross Beam Press. Constructed from solid, sustainably sourced beechwood staved and girded by robust cast iron hoops.
A pair of spacing blocks compatible with our 12 Litre Spindle Press. Useful for additional pressing power and greater juice yield. Made from solid, sustainably sourced beechwood.
A replacement handle for our 12 Litre Spindle Press. Use for additional leverage when pressing for greater juice yield. Made from stainless steel.
A set of spare stainless steel cross beam supports for the 4.5 Litre Worktop Press.