Catalogue
A replacement tap to fit the 12, 20 and 30 litre plastic Speidel tanks.
A replacement tap to fit plastic Speidel tanks of 60, 100 and 200 litre capacity.
A food grade polyethylene cap to fit bottom outlet of 12, 20, 30, 60, 100 & 200, 300 and 500 litre Speidel fermenters.
A spare press bag for the Speidel hydropress. Available in 20, 40 and 90 litre sizes.
A complete replacement for the bladder of the Speidel hydropress. Available in 3 sizes: 20, 40 and 90 litres.
A replacement rubber lid seal for the Speidel 30 litre fermentation tank. 120 X 4mm.
Replacement Speidel ball valve (BSP) suitable for 20 litre, 40 litre and 90 litre hydropresses - male / male ends.
A spare splash cover to minimise mess when using the Speidel hydropress. Available in 20 and 40 litre sizes.
A replacement seal to fit the lids of plastic Speidel fermenters ranging from 60 to 500 litres in capacity.
Seal - O ring nitrile 100 x 7mm
A complete replacement hopper for the Speidel Mill. Made entirely from heavy duty, food grade plastic.
A replacement lid, complete with insert and O-ring seal, compatible with 20 and 30 Litre Speidel fermenters
A 6m long power cable with a moulded plug and a 13A fuse. This will allow you to run the Speidel Mill from a UK mains power supply.
A replacement lid including black plastic ring and O-ring seal for the 60 & 120 Litre Speidel barrel.
A single acacia wood rack for use with the pack press.
A set of replacement pre crusher blades for the incredibly powerful Speidel Mill.
A replacement hopper that will fit both our Economy and Classic crushers.
A complete replacement of the cross beam section of our 12 litre press, including both the ball bearing and split pin.
A replacement pawl for the 20 and 36 Litre Cross Beam Press ratchet mechanisms.
A nitrile V ring seal, compatible with the Speidel Mill.
A single flat cutting knife for the Speidel Mill. These are reversible so when one side of the blade is dulled or blunted they can be turned around to essentially double their lifespan.
Medically pure, food safe petroleum jelly, ideal for use as a lubricant for variable capacity tanks, kegs, etc.
A spare juice collection tray compatible with both our 20 and 36 Litre Cross Beam presses. Made from food grade stainless steel.
A replacement bearing compatible with the Speidel Mill. Part code 62052RS.
A replacement dome nut for the Speidel Mill. Attaches the pre crusher blade to the mounting plate and the cutting blades.
A complete pressure plate assembly compatible with both our 20 and 36 Litre Cross Beam Presses. Includes carry handles for ease of transport and positioning.
A replacement bearing plate, complete with solid beechwood block and brass disc. Compatible with both our 20 and 36 Litre Cross Bream presses.
A complete replacement for the spindle mechanism in both our 20 and 36 Litre Cross Beam presses, so this will work with both.
A replacement pawl for the ratchet mechanism of the Pack Press.
Speidel touch up paint to cover any chips or scrapes and maintain a clean appearance. All paint supplied is food safe.
What's included? A replacement pressure plate for our 12 Litre Cross Beam Press. Made entirely from solid, sustainably sourced beechwood.
A replacement pressure disc compatible with both our 20 and 36 Litre Cross Beam Presses. As their press cages have the same diameter the disc is a perfect for for both.
A replacement blade for the original and highly popular Pulpmaster fruit crushing solution.
A replacement leg for our 9 Litre Spindle Press. Made from durable cast iron.
A complete replacement pressing cage for the 12 Litre Cross Beam Press. Constructed from sustainably sourced beechwood staved and girded by robust cast iron hoops.
A replacement microswitch for the Vares Fruit Shark electric mill.
A pressing cage for our 9 Litre Spindle Press. The cage is made from sustainably sourced beechwood slats and is girded by solid cast iron hoops.
A food grade plastic bucket that's the perfect size to work with our incredibly popular Pulpmaster fruit crushing system. The bucket will hold up to 3kg of apples at once.
A complete replacement base with a threaded spindle compatible with our 9 Litre Spindle Press. Constructed entirely from durable cast iron and stainless steel. Please note legs are not included but are available separately if required.
A replacement top pressure block for the 9 Litre Spindle Press. Made from durable cast iron and solid wood.
A replacement brass disc that pairs with the bearing plate of our 20 and 36 Litre Cross Beam presses to accept the spindle mechanism.
A complete replacement fruit hopper for our Stainless Steel Mill.
A complete replacement pressing cage for our 20 Litre Cross Beam Press. Constructed from solid, sustainably sourced beechwood staved and girded by robust cast iron hoops.
A replacement former for the Pack Press. Used to build the pomace cheeses that are sandwiched between acacia racks to be pressed.
A pair of pressure plates to fit our 9 Litre Spindle press. The two halves are assembled under the top block to form the pressing mechanism and juice is extracted.
Armature that fits both the 20 & 40 litre Speidel Hydropresses
A replacement press cage for our 4.5 Litre Worktop Press. Made entirely from high quality stainless steel.
A replacement handle compatible with both our 20 and 36 Litre Cross Beam presses. Used to help operate the pressing mechanism.
What's included? A replacement grub screw that pairs with the Classic Crusher's hand wheel.
A replacement bearing plate complete with solid brass insert to accept the spindle mechanism of our Pack Press.
A splash sleeve compatible with the 4.5 Litre Worktop Press. This minimises the mess caused when pressing and will keep the juice from spilling!
Screw on adaptor for all Speidel plastic barrels (round and oval). Provides a 1" male connection for use with other fittings.
A replacement juice collection tray, compatible with our Pack Press. Made from food grade stainless steel.
A spare transport vessel that's compatible with both versions of the Vares Fruit Shark (both the regular and the larger Megalodon version). These are ideal when you have lots of fruit to process and need additional storage.
A replacement tightening nut compatible with the 20 litre and 40 litre Speidel hydropresses. Used to secure the lid and keep it in place while pressing.
A 50cm x 50cm solid acacia wood rack for use with the rack and cloth press. These racks are extremely durable and are built to last. Sourced from FSC approved forests.
A set of 2 additional spacing blocks for the 9 Litre Spindle Press. Useful for additional leverage and pressing power if required.
A replacement handle compatible with our Economy fruit crusher. Made from solid wood and welded steel with a moulded grip for comfort. Includes a fitting screw.
A complete replacement base and spindle for our 12 Litre Stainless Steel Press. Legs are also included as part of the base.
A replacement for the spindle component of the Pack Press.
A replacement cage for our 12 Litre Stainless Steel Press. Made from sustainably sourced beechwood staves and girded by stainless steel hoops.
A replacement top beam component compatible with both our 20 and 36 Litre Cross Beam presses.
A replacement rubber seal to fit with the hopper onto the base of our Stainless Steel Mill. This ensures an airtight seal and less mess and air ingress when crushing your fruit.
A replacement split pin for the 12 Litre Cross Beam Press.