Catalogue
A food grade polyethylene cap to fit bottom outlet of 12, 20, 30, 60, 100 & 200, 300 and 500 litre Speidel fermenters.
A spare press bag for the Speidel hydropress. Available in 20, 40 and 90 litre sizes.
A complete replacement for the bladder of the Speidel hydropress. Available in 3 sizes: 20, 40 and 90 litres.
A replacement rubber lid seal for the Speidel 30 litre fermentation tank. 120 X 4mm.
Replacement Speidel ball valve (BSP) suitable for 20 litre, 40 litre and 90 litre hydropresses - male / male ends.
A replacement seal to fit the lids of plastic Speidel fermenters ranging from 60 to 500 litres in capacity.
Seal - O ring nitrile 100 x 7mm
A spare splash cover to minimise mess when using the Speidel hydropress. Available in 20 and 40 litre sizes.
A replacement lid, complete with insert and O-ring seal, compatible with 20 and 30 Litre Speidel fermenters
A complete replacement hopper for the Speidel Mill. Made entirely from heavy duty, food grade plastic.
A 6m long power cable with a moulded plug and a 13A fuse. This will allow you to run the Speidel Mill from a UK mains power supply.
A replacement lid including black plastic ring and O-ring seal for the 60 & 120 Litre Speidel barrel.
A set of replacement pre crusher blades for the incredibly powerful Speidel Mill.
A replacement hopper that will fit both our Economy and Classic crushers.
A single acacia wood rack for use with the pack press.
A complete replacement of the cross beam section of our 12 litre press, including both the ball bearing and split pin.
A single flat cutting knife for the Speidel Mill. These are reversible so when one side of the blade is dulled or blunted they can be turned around to essentially double their lifespan.
A nitrile V ring seal, compatible with the Speidel Mill.
A replacement pawl for the 20 and 36 Litre Cross Beam Press ratchet mechanisms.
A replacement bearing compatible with the Speidel Mill. Part code 62052RS.
A spare juice collection tray compatible with both our 20 and 36 Litre Cross Beam presses. Made from food grade stainless steel.
A replacement dome nut for the Speidel Mill. Attaches the pre crusher blade to the mounting plate and the cutting blades.
A replacement bearing plate, complete with solid beechwood block and brass disc. Compatible with both our 20 and 36 Litre Cross Bream presses.
A complete pressure plate assembly compatible with both our 20 and 36 Litre Cross Beam Presses. Includes carry handles for ease of transport and positioning.
A complete replacement for the spindle mechanism in both our 20 and 36 Litre Cross Beam presses, so this will work with both.
A replacement blade for the original and highly popular Pulpmaster fruit crushing solution.
A replacement pawl for the ratchet mechanism of the Pack Press.
What's included? A replacement pressure plate for our 12 Litre Cross Beam Press. Made entirely from solid, sustainably sourced beechwood.
Speidel touch up paint to cover any chips or scrapes and maintain a clean appearance. All paint supplied is food safe.
A replacement pressure disc compatible with both our 20 and 36 Litre Cross Beam Presses. As their press cages have the same diameter the disc is a perfect for for both.
A complete replacement pressing cage for the 12 Litre Cross Beam Press. Constructed from sustainably sourced beechwood staved and girded by robust cast iron hoops.
A replacement leg for our 9 Litre Spindle Press. Made from durable cast iron.
A replacement microswitch for the Vares Fruit Shark electric mill.
A pressing cage for our 9 Litre Spindle Press. The cage is made from sustainably sourced beechwood slats and is girded by solid cast iron hoops.
A food grade plastic bucket that's the perfect size to work with our incredibly popular Pulpmaster fruit crushing system. The bucket will hold up to 3kg of apples at once.
A complete replacement fruit hopper for our Stainless Steel Mill.
Screw on adaptor for all Speidel plastic barrels (round and oval). Provides a 1" male connection for use with other fittings.
A complete replacement base with a threaded spindle compatible with our 9 Litre Spindle Press. Constructed entirely from durable cast iron and stainless steel. Please note legs are not included but are available separately if required.
A replacement top pressure block for the 9 Litre Spindle Press. Made from durable cast iron and solid wood.
A replacement brass disc that pairs with the bearing plate of our 20 and 36 Litre Cross Beam presses to accept the spindle mechanism.
A complete replacement pressing cage for our 20 Litre Cross Beam Press. Constructed from solid, sustainably sourced beechwood staved and girded by robust cast iron hoops.
A replacement former for the Pack Press. Used to build the pomace cheeses that are sandwiched between acacia racks to be pressed.
Armature that fits both the 20 & 40 litre Speidel Hydropresses
A pair of pressure plates to fit our 9 Litre Spindle press. The two halves are assembled under the top block to form the pressing mechanism and juice is extracted.
A replacement press cage for our 4.5 Litre Worktop Press. Made entirely from high quality stainless steel.
What's included? A replacement grub screw that pairs with the Classic Crusher's hand wheel.
A replacement handle compatible with both our 20 and 36 Litre Cross Beam presses. Used to help operate the pressing mechanism.
A replacement bearing plate complete with solid brass insert to accept the spindle mechanism of our Pack Press.
A replacement juice collection tray, compatible with our Pack Press. Made from food grade stainless steel.
A spare transport vessel that's compatible with both versions of the Vares Fruit Shark (both the regular and the larger Megalodon version). These are ideal when you have lots of fruit to process and need additional storage.
A 50cm x 50cm solid acacia wood rack for use with the rack and cloth press. These racks are extremely durable and are built to last. Sourced from FSC approved forests.
A replacement handle compatible with our Economy fruit crusher. Made from solid wood and welded steel with a moulded grip for comfort. Includes a fitting screw.
A splash sleeve compatible with the 4.5 Litre Worktop Press. This minimises the mess caused when pressing and will keep the juice from spilling!
A replacement rubber seal to fit with the hopper onto the base of our Stainless Steel Mill. This ensures an airtight seal and less mess and air ingress when crushing your fruit.
A replacement tightening nut compatible with the 20 litre and 40 litre Speidel hydropresses. Used to secure the lid and keep it in place while pressing.
A set of 2 additional spacing blocks for the 9 Litre Spindle Press. Useful for additional leverage and pressing power if required.
A complete replacement base and spindle for our 12 Litre Stainless Steel Press. Legs are also included as part of the base.
A replacement for the spindle component of the Pack Press.
A replacement cage for our 12 Litre Stainless Steel Press. Made from sustainably sourced beechwood staves and girded by stainless steel hoops.
A replacement top beam component compatible with both our 20 and 36 Litre Cross Beam presses.
A replacement split pin for the 12 Litre Cross Beam Press.
The blade and lid components of the original and highly popular Pulpmaster fruit crushing solution. The blade attaches to a mains drill and will quickly pulp your fruit to the perfect consistency for pressing.
A replacement handle compatible with our 12 Litre Cross Beam Press.
A complete set of replacement blades for the 1.6kW Fruit Shark electric mill from Vares. Comes with all screws and fittings.
A complete replacement motor unit for our Stainless Steel Mill.
A replacement gasket for the Fruit Shark machine from Vares.
A replacement collar for our 9 Litre Spindle Press. Made from durable cast iron.
A replacement juice catchment tray for our 4.5 Litre Worktop Press.
A replacement wooden frame for the Vigo Presses classic crusher complete with carry handles and mounting holes.
A replacement on/off power switch compatible with our standard Stainless Steel Mill.
A replacement base plate for the 12 Litre Cross Beam Press. Constructed from robust cast iron. Please note legs are not included but are available separately if required.
A replacement lid, complete with insert and O-ring seal, compatible with 60 to 500 Litre Speidel fermenters
A complete replacement pressing cage for our 36 Litre Cross Beam Press. Constructed from solid, sustainably sourced beechwood staved and girded by robust cast iron hoops.
A replacement cross beam and rod, forming part of the pressing mechanism of our 4.5 Litre Worktop Press. Made from stainless steel and solid brass.
A replacement handle for the Vigo Presses Classic Crusher. Solid wood construction with a moulded grip for comfort.
A replacement pressure block for the Pack Press. This is a solid, heavy duty wooden plate made from sustainably sourced beech.
A replacement cutting mechanism compatible with both our Economy and Classic crushers. Precision blades and rollers specifically designed to reduce your fruit to a pulp that's the perfect consistency for pressing.
A pair of spacing blocks compatible with our 12 Litre Spindle Press. Useful for additional pressing power and greater juice yield. Made from solid, sustainably sourced beechwood.
A replacement rest/grip handle that is compatible with both our Economy and Classic crushers. Durable, solid wood construction.
A set of spare stainless steel cross beam supports for the 4.5 Litre Worktop Press.
A replacement handle for our 12 Litre Spindle Press. Use for additional leverage when pressing for greater juice yield. Made from stainless steel.
Food grade plastic tubing compatible with our 4.5 Litre Worktop Press. Attaches to the juice tray and catches juice for collection into another vessel.
What's included? A set of 2 replacement cutting blades for our Stainless Steel Mill. The blades are reversible for additional life.
A replacement for the top cross beam component of our Pack Press.
A complete set of 4 replacement legs, compatible with both our 20 and 36 Litre Cross Beam presses. Constructed from solid, durable cast iron.
A complete bearing block assembly with cast iron plate and brass insert, compatible with our Pack Press.
A replacement torque resistor for our 4.5 Litre Worktop Press.
A replacement collar for our 12 Litre Spindle Press. Constructed from solid stainless steel.
A pair of pressure plates compatible with our 12 Litre Spindle Press. These combine with the top block and collar to form the pressing mechanism.
A replacement hand wheel for the Vigo Presses Classic Crusher. Please note this does not include the grub screw which is available separately if needed.
A spare set of carry handles that attach to the pressure plate of both our 20 and 36 Litre Cross Beam Presses. Also compatible with our Pack Press.
A replacement handle for the Pack Press. For easier operation of the pressing mechanism. Made from solid stainless steel.
A replacement top pressure block for the 12 Litre Stainless Steel Spindle Press.
A replacement mounting plate for our Stainless Steel Mill. This holds the cutting blades and spins allowing your fruit to be crushed correctly.
A single replacement leg compatible with our 12 Litre Cross Beam Press. Made from durable cast iron.
A replacement ball bearing for the 12 Litre Cross Beam Press.
Plastic disc for use with the 6 and 12 litre Hobby Presses.
A replacement motor shaft seal for the Stainless Steel Mill.
Pressure plate for the 6 litre Hobby Press.
A set of 4 replacement bearing blocks compatible with both our Economy and Classic Crushers.
A replacement pre crusher blade for our Stainless Steel Mill.
A set of 2 replacement paddles for our Stainless Steel Mill.
A complete set of 4 replacement legs, compatible with the Pack Press. Complete with all attachment screws required.
A replacement dome nut to secure the pre crusher blade in our Stainless Steel Mill.
A replacement pressure plate for the 4.5 Litre Worktop Press, made entirely from high quality stainless steel.
A pair of spacing blocks to fit the 6 litre Hobby Press.
3 bar safety valve
A pair of half disc pressure plates for the Vigo Presses 12 litre Hobby Press
A pair of half disc pressure plates for the 6 litre Hobby Press
Pressure plate for the Vigo Presses 12 litre Hobby Press. Includes metal plate and wooden block complimented with the Vigo Presses logo.
A replacement spindle for the 6 litre hobby press. Fixes directly into the base and delivered in two parts.
A pair of spacing blocks to fit the Vigo Presses 12 litre Hobby Press.
Locking nut for top lid of Speidel 90 litre Hydropress.
Replacement motor for the Speidel Mill.
A replacement wing nut for the 12 Litre Cross Beam Press.