01404 890093
Vigo Presses Logo

Catalogue

Make Apple Juice Make Cider Dry Fruit & Veg Create Cordials Bottle Fruit Recipes Other

Cider and Juice

CIDER AND JUICE - Categories

Sort by Position: Low to High
128 Per Page
Lalvin QA23 Yeast 125g
£10.25

A 125g pack of Lalvin QA23 strain yeast. Recommended for the production of white wines and ciders where fresh, fruity clean finishes are required.

In stock
+ −
Uvaferm BC Yeast 500g
£19.99

What's included? A 500g pack of Uvaferm BC yeast. This strain has been specially selected for its ability to produce high quality ciders.

In stock
+ −
Yeast Nutrient 100g
£7.75

A 100g tub of high quality yeast nutrient (Fermaid K) widely used by commercial producers.

In stock
+ −
Cider Brite Cider Finings
£3.95

What's included? A 3 dose pot of Cider Brite fast acting isinglass finings. Each dose will treat up to 5 gallons of cider (22.5 litres).

Out of stock
Young's Dried Active Yeast 100g
£3.15

What's included? A 100g tub of brewing yeast from Young's that's suitable for a wide range of homebrewing applications.

Out of stock
Young's Sparkling White Wine Yeast 5g
£4.00

A 5g sachet of yeast from young's. This strain is known for its exceptional reliability and its ability to consistently deliver fresh, clean, crisp and robust brews. It is suitable for both wine and cider.

In stock
+ −
Pulcino 10 Sheet Filter with Pump
£250.00

Our 10 plate sheet filter, built to our specifications and suitable for filtering wine, beer and cider on a small to medium scale. The filter takes 20X10cm sheets (available separately) and can process up to around 100 litres per hour depending upon the type of liquid being filtered and the grade of sheet used.

Out of stock
Rover Pompe 'Pulcino 10' Filter Sheets 20 x 10cm - Pack of 5
£5.00

A pack of 5 sheets to fit the Vigo Presses 20 x 10cm Sheet Filter. There are 5 grades available depending upon the level of filtration you require.

In stock
 
Select a Variation
Grifo FCP10 (20x20) 10 Plate Filter with Pump
£775.00

The Grifo FCP10 10 Plate Filter with Pump, which is perfect for a boutique or smaller sized wine or cider producer. The machine is built in Italy to an incredibly high specification.

Out of stock
20 x 20cm Filter Sheets for Grifo FCP Filter - Pack of 10
£15.75

A pack of 10 filter sheets compatible with the Grifo FCP10 Plate Filter. These are available in 3 grades.

In stock
 
Select a Variation
Suction Filter
£4.25

A plastic suction filter which connects to your pump tubing to remove large particles from juice. Available in 3 different sizes.

In stock
 
Select a Variation
Amazon Filters 10" Cartridge Filter Housing
£55.00

A 10" clear housing for cartridge filters from Amazon Filters. This will accept most industry standard disposable filters of the correct size.

In stock
+ −
Amazon Filters 10" SupaGuard Depth Cartridge Filter
£16.50

A 10" depth cartridge filter from Amazon Filters. These single use cartridges give high performance and excellent filtration for a clearer, cleaner end product.

In stock
 
Select a Variation
Apple Juice Labels 97X137mm - Pack of 24
£5.25

A pack of 24 self adhesive labels with attractive apple print. Sick to your bottles of juice and add handwritten details for a truly professional look!

In stock
+ −
Cider Labels 97X137mm - Pack of 24
£5.25

A pack of 24 self adhesive labels with attractive apple print. Sick to your bottles of cider and add handwritten details for a truly professional look!

In stock
+ −
Flexlabeller PE
Stellin Flexlabeller PE Manual Labeller
Contact us for a price

** Supplied to order, please contact us with your requirements for a quotation **

The Stellin Flexlabeller PE Labeller, a hand operated labelling machine suitable for smaller production runs.

Out of stock
Stellin Flexlabeller Evoluzione Labeller
Contact us for a price

** Supplied to order, please contact us with your requirements for a quotation **

The Stellin Flexlabeller Evoluzione, a hand operated labelling machine that is ideal for smaller production runs.

Out of stock
Stellin Flexlabeller PE-Q Labeller
£710.00

The Stellin Flexlabeller PE-Q Labeller, a hand operated labeller perfect for square and rectangular containers.

In stock
+ −
Flexlabeller PE-E with a wine bottle being labelled
Stellin Flexlabeller PE-E Labeller
Contact us for a price

** Supplied to order, please contact us with your requirements for a quotation **

A semi-automatic labeller for use with cylindrical bottles with an output of up to 600 bottles per hour (dependant on operator speed).

Out of stock
Stellin Flexlabeller PE-ET Labeller
Contact us for a price

** Supplied to order, please contact us with your requirements for a quotation **

A semi-automatic labeller for use with cylindrical bottles with an output of up to 600 bottles per hour (dependant on operator speed). Has an automatic date/lot stamp built in.

Out of stock
Food Grade Nozzle 20mm
£23.85

A convenient food-grade nozzle for filling bulk containers such as bag-in-box and plastic barrels.

Out of stock
Easy Start Automatic Siphon
£10.50

The Easy Start automatic siphoning system; an incredibly simple yet effective way to make siphoning easy and less messy! Comes with full instructions for use.

In stock
+ −
2 Nozzle Bottle Filler
£184.00

A stainless steel bottle filler with 2 nozzles providing fast, accurate filling for bottles from 250ml to 1 litre in size.

In stock
+ −
4 Nozzle Bottle Filler
£235.00

A stainless steel bottle filler with 4 nozzles providing fast, accurate filling for bottles from 250ml to 1 litre in size.

In stock
+ −
6 Nozzle Bottle Filler
£327.50

A stainless steel bottle filler with 6 nozzles providing fast, accurate filling for bottles from 250ml to 1 litre in size.

In stock
+ −
4 Nozzle Gravity Filler - Bench Model
Contact us for a price

** Supplied to order, please contact us with your requirements for a quotation **

A gravity powered bottle filler completely made of stainless steel AISI 304, suitable for bottling liquids such as wine, beer, cider, oil and more.

Out of stock
6 Nozzle Gravity Filler Trolley Version with Pump and Float
Contact us for a price

** Supplied to order, please contact us with your requirements for a quotation **

Gravity filler completely made of stainless steel AISI 304, suitable for bottling wine, beer cider oil and more.

Out of stock
Bag in Box and Pouch Filling Station and Scales
Contact us for a price

Bag in box filling station including a digital balance scale, platform, adjustable support and filling gun.

Out of stock
Connection Kit - Speidel Plastic Tank to 2, 4 or 6 Nozzle Bottle Filler
£23.75

A complete kit to connect your Speidel tanks to one of our stainless steel fillers for gravity filling of your bottles.

In stock
+ −
Super Automatic Bottle Filler
£23.50

An incredibly handy tool for the quick and easy filling of wine bottles at home. Perfect for homebrewers and winemakers.

In stock
+ −
Young's Little Bottler
£7.75

An ingenious, easy to use device that makes filling bottles easy.

In stock
+ −
Craft Cider Making - Andrew Lea
£12.99

This 3rd edition book is an invaluable guide to making good cider and apple juice, as well as growing apple trees. Whether you have a couple of trees in your back garden or several acres of orchard this is the book for you!

In stock
+ −
Basic Cider and Juice Making - Alex Hill
£3.00

Written by Alex Hill, who makes prize-winning Bollhayes Cider and is the founder of Vigo, this simple 8 page guide gives basic information about the process of juice and cider making. It is perfect for the novice cider and juice maker.

In stock
+ −
Save 16%
The Cider Insider - Susanna Forbes
£24.99 £20.99

In The Cider Insider, award-winning drinks writer Susanna Forbes has hand-picked 100 great ciders that are worth seeking out and drinking now.

In stock
+ −
Save 9%
Ciderology - Gabe Cook
£10.99 £9.99

Everything you ever needed to know about cider, from the history of the drink and the traditions surrounding it, to recommended regional varieties and the best terroirs, from the leading UK expert on cider, Gabe Cook.

In stock
+ −
Save 13%
The Devon Orchards Book - Michael Gee
£14.99 £12.99

This expertly written and beautifully illustrated volume investigates this recent turn-round and offers a positive vision of the future, with practical suggestions on how lovers of Devon might ensure it remains a county of orchards.

Out of stock
Cider Apples -The New Pomona - Liz Copas
£16.99

The newly revised edition of 'Cider - A Somerset Pomona', which now includes cider apples from all the major cider growing counties, namely Somerset, Devon, Dorset, Cornwall, Gloucestershire, Hereford and Worcester.

In stock
+ −
Save 15%
Community Orchards Handbook - Angela King and Sue Gifford
£12.99 £10.99

This book is essential reading for any group thinking of setting up a community orchard and indeed has a wealth of useful information for any enthusiast keen to revive and maintain Britain's orchard tradition.

Out of stock
Save 12%
An Orchard Odyssey - Naomi Slade
£24.99 £21.99

An Orchard Odyssey is a gloriously illustrated resource for fruit-lovers everywhere.

In stock
+ −
Save 13%
Fruit - River Cottage Handbook No.9 - Mark Diacono
£14.99 £12.99

This beautifully illustrated book is a lyrically persuasive yet highly practical and extensive guide to growing and using your own fruit.

In stock
+ −
Save 3%
27 Litre Analogue Pasteuriser with Steam Juice Extractor Top
Analogue Pasteuriser / Steam Juice Extractor Top Combo
£288.50 £278.50

A combination package of our popular analogue pasteuriser and the steam extractor top attachment for it. This is the deluxe pasteuriser which has an automatic timer that will begin as soon as the unit reaches the desired temperature.

In stock
+ −
Pulpmaster Blade
£16.50

A replacement blade for the original and highly popular Pulpmaster fruit crushing solution.

In stock
+ −
Pulpmaster Blade and Lid
£22.00

The blade and lid components of the original and highly popular Pulpmaster fruit crushing solution. The blade attaches to a mains drill and will quickly pulp your fruit to the perfect consistency for pressing. Note: Does not include bucket.

In stock
+ −
Pulpmaster Bucket
£5.00

A food grade plastic bucket that's the perfect size to work with our incredibly popular Pulpmaster fruit crushing system. The bucket will hold up to 3kg of apples at once.

In stock
+ −
Hopper for Economy and Classic Crusher
£75.00

A replacement hopper that will fit both our Economy and Classic crushers.

In stock
+ −
Classic Crusher Hand Wheel
£87.00

A replacement hand wheel for the Vigo Presses Classic Crusher. Please note this does not include the grub screw which is available separately if needed.

In stock
+ −
Bearing Blocks for Economy and Classic Crusher - Set of 4
£21.99

A set of 4 replacement bearing blocks compatible with both our Economy and Classic Crushers.

In stock
+ −
Hand Wheel Handle for Classic Crusher
£6.25

A replacement handle for the Vigo Presses Classic Crusher. Solid wood construction with a moulded grip for comfort.

In stock
+ −
Wooden Frame for Classic Crusher
£125.00

A replacement wooden frame for the Vigo Presses classic crusher complete with carry handles and mounting holes.

In stock
+ −
Cutters and Cogs for Economy and Classic Crusher
£141.00

A replacement cutting mechanism compatible with both our Economy and Classic crushers. Precision blades and rollers specifically designed to reduce your fruit to a pulp that's the perfect consistency for pressing.

In stock
+ −
Grub Screw
£1.25

What's included? A replacement grub screw that pairs with the Classic Crusher's hand wheel.

In stock
+ −
Wooden Rest for Economy and Classic Crusher
£13.75

A replacement rest/grip handle that is compatible with both our Economy and Classic crushers. Durable, solid wood construction.

In stock
+ −
Crank Handle, Grip and Screw for Economy Crusher
£25.25

A replacement handle compatible with our Economy fruit crusher. Made from solid wood and welded steel with a moulded grip for comfort. Includes a fitting screw.

In stock
+ −
Vigo Presses Stainless Steel Mill Hopper
£125.00

A complete replacement fruit hopper for our Stainless Steel Mill.

In stock
+ −
On/Off Switch for Stainless Steel Mill
£18.50

A replacement on/off power switch compatible with our standard Stainless Steel Mill.

In stock
+ −
Plate for Stainless Steel Mill
£22.50

A replacement mounting plate for our Stainless Steel Mill. This holds the cutting blades and spins allowing your fruit to be crushed correctly.

In stock
+ −
Motor for Stainless Steel Mill
£189.00

A complete replacement motor unit for our Stainless Steel Mill.

Out of stock
Paddles for Stainless Steel Mill - Set of 2
£3.00

A set of 2 replacement paddles for our Stainless Steel Mill.

In stock
+ −
Dome Nut for Stainless Steel Mill
£1.25

A replacement dome nut to secure the pre crusher blade in our Stainless Steel Mill.

In stock
+ −
Pre Crusher Blade for Stainless Steel Mill
£15.00

A replacement pre crusher blade for our Stainless Steel Mill.

In stock
+ −
Blades for Stainless Steel Mill - Set of 2
£17.50

What's included? A set of 2 replacement cutting blades for our Stainless Steel Mill. The blades are reversible for additional life.

In stock
+ −
Motor Seal Shaft for Stainless Steel Mill
Motor Shaft Seal for Stainless Steel Mill
£10.50

A replacement motor shaft seal for the Stainless Steel Mill.

In stock
+ −
Stainless Steel Mill Hopper Seal
Rubber Hopper Seal for Stainless Steel Mill
£9.95

A replacement rubber seal to fit with the hopper onto the base of our Stainless Steel Mill. This ensures an airtight seal and less mess and air ingress when crushing your fruit.

In stock
+ −
Gasket for Fruit Shark
£10.50

A replacement gasket for the Fruit Shark machine from Vares.

Out of stock
Blade Set for Fruit Shark 1.6kW
£28.50

A complete set of replacement blades for the 1.6kW Fruit Shark electric mill from Vares. Comes with all screws and fittings.

In stock
+ −
Vares Fruit Shark Transport Vessel
£58.00

A spare transport vessel that's compatible with both versions of the Vares Fruit Shark (both the regular and the larger Megalodon version). These are ideal when you have lots of fruit to process and need additional storage.

In stock
+ −
Microswitch for Fruit Shark
£25.25

A replacement microswitch for the Vares Fruit Shark electric mill.

In stock
+ −
Speidel Mill Hopper
£135.00

A complete replacement hopper for the Speidel Mill. Made entirely from heavy duty, food grade plastic.

In stock
+ −
Pre Crusher Blades for Speidel Mill
£19.99

A set of replacement pre crusher blades for the incredibly powerful Speidel Mill.

In stock
+ −
Dome Nut for Speidel Mill
£13.50

A replacement dome nut for the Speidel Mill. Attaches the pre crusher blade to the mounting plate and the cutting blades.

In stock
+ −
A pair of blades for the Speidel Mill
Flat Knife Blade for Speidel Mill (Single)
£19.50

A single flat cutting knife for the Speidel Mill. These are reversible so when one side of the blade is dulled or blunted they can be turned around to essentially double their lifespan.

Note: Image shows two blades. If two blades are required please select 2 in the quantity.

In stock
+ −
6m Cable with Moulded UK Plug and 13A Fuse
£36.99

A 6m long power cable with a moulded plug and a 13A fuse. This will allow you to run the Speidel Mill from a UK mains power supply.

In stock
+ −
V Ring Nitrile Seal 25A
£10.25

A nitrile V ring seal, compatible with the Speidel Mill.

In stock
+ −
Motor Bearing for Speidel Mill
£19.25

A replacement bearing compatible with the Speidel Mill. Part code 62052RS.

In stock
+ −
Retaining Cross Beam Supports for 4.5 Litre Press
£22.50

A set of spare stainless steel cross beam supports for the 4.5 Litre Worktop Press.

In stock
+ −
Splash Sleeve for 4.5 Litre Press
£5.00

A splash sleeve compatible with the 4.5 Litre Worktop Press. This minimises the mess caused when pressing and will keep the juice from spilling!

In stock
+ −
Plastic Juice Tray for 4.5 Litre Press
£12.50

A replacement juice catchment tray for our 4.5 Litre Worktop Press.

In stock
+ −
Plastic Tube for 4.5 Litre Press
£1.90

Food grade plastic tubing compatible with our 4.5 Litre Worktop Press. Attaches to the juice tray and catches juice for collection into another vessel.

In stock
+ −
Cross Beam and Threaded Rod for 4.5 Litre Press
£25.25

A replacement cross beam and rod, forming part of the pressing mechanism of our 4.5 Litre Worktop Press. Made from stainless steel and solid brass.

In stock
+ −
Pressure Plate for 4.5 Litre Press
£15.00

A replacement pressure plate for the 4.5 Litre Worktop Press, made entirely from high quality stainless steel.

Out of stock
Plastic Torque Resistor for 4.5 Litre Press
£6.25

A replacement torque resistor for our 4.5 Litre Worktop Press.

In stock
+ −
Stainless Steel Cage for 4.5 litre Cross Beam Press
Perforated Cylinder for 4.5 Litre Press
£28.50

A replacement press cage for our 4.5 Litre Worktop Press. Made entirely from high quality stainless steel.

In stock
+ −
Pressure Block for 9 Litre Press
£18.50

A replacement top pressure block for the 9 Litre Spindle Press. Made from durable cast iron and solid wood.

In stock
+ −
Spacing Blocks for 9 Litre Press - Set of 2
£13.75

A set of 2 additional spacing blocks for the 9 Litre Spindle Press. Useful for additional leverage and pressing power if required.

In stock
+ −
Half Disc Pressure Plates Pair for 9 Litre Press
£13.75

A pair of pressure plates to fit our 9 Litre Spindle press. The two halves are assembled under the top block to form the pressing mechanism and juice is extracted.

Out of stock
Cage for 9 Litre Press
£50.00

A pressing cage for our 9 Litre Spindle Press. The cage is made from sustainably sourced beechwood slats and is girded by solid cast iron hoops.

In stock
+ −
Threaded Spindle and Base Plate for 9 Litre Press
£124.00

A complete replacement base with a threaded spindle compatible with our 9 Litre Spindle Press. Constructed entirely from durable cast iron and stainless steel. Please note legs are not included but are available separately if required.

Out of stock
Leg for 9 Litre Press (Single)
£7.99

A replacement leg for our 9 Litre Spindle Press. Made from durable cast iron.

In stock
+ −
Collar for 6 & 9 Litre Presses
£17.00

A replacement collar that fits our 6 and 9 Litre Hobby Presses and the 9 Litre Cast Iron Press.

In stock
+ −
Handle for 12 Litre Cross Beam Press
£18.50

A replacement handle compatible with our 12 Litre Cross Beam Press.

In stock
+ −
12 Litre Cross Beam Set with Ball Bearing and Split Pin
£75.00

A complete replacement of the cross beam section of our 12 litre press, including both the ball bearing and split pin.

In stock
+ −
Pressure Plate with Bearing Plate for 12 Litre Cross Beam Press
£45.00

A replacement pressure plate for our 12 Litre Cross Beam Press. Made entirely from solid, sustainably sourced beechwood.

In stock
+ −
Cage for 12 Litre Cross Beam Press
£62.00

A complete replacement pressing cage for the 12 Litre Cross Beam Press. Constructed from sustainably sourced beechwood staved and girded by robust cast iron hoops.

Out of stock
Base Plate with Uprights for 12 Litre Cross Beam Press
£177.00

A replacement base plate for the 12 Litre Cross Beam Press. Constructed from robust cast iron. Please note legs are not included but are available separately if required.

In stock
+ −
Leg for 12 Litre Cross Beam Press (Single)
£7.99

A single replacement leg compatible with our 12 Litre Cross Beam Press. Made from durable cast iron.

In stock
+ −
Handle for 6, 9 and 12 Litre Spindle Press
£14.50

A replacement handle for our 12 Litre Spindle Press. Use for additional leverage when pressing for greater juice yield. Made from stainless steel.

In stock
+ −
Threaded Spindle and Base Plate for 12 Litre Press
£99.99

A complete replacement base and spindle for our 12 Litre Stainless Steel Press. Legs are also included as part of the base.

In stock
+ −
Cage for 12 Litre Spindle Press
£62.00

A replacement cage for our 12 Litre Stainless Steel Press. Made from sustainably sourced beechwood staves and girded by stainless steel hoops.

In stock
+ −
Pressure Block for 12 Litre Spindle Press
£19.99

A replacement top pressure block for the 12 Litre Stainless Steel Spindle Press.

Out of stock
Collar for 12 Litre Spindle Press
£17.00

A replacement collar for our 12 Litre Spindle Press. Constructed from solid stainless steel.

In stock
+ −
Half Disc Pressure Plates Pair for 12 Litre Spindle Press
£18.50

A pair of pressure plates compatible with our 12 Litre Spindle Press. These combine with the top block and collar to form the pressing mechanism.

In stock
+ −
Spacing Blocks for 12 Litre Spindle Press (Set of 2)
£25.25

A pair of spacing blocks compatible with our 12 Litre Spindle Press. Useful for additional pressing power and greater juice yield. Made from solid, sustainably sourced beechwood.

In stock
+ −
Pawl for Ratchet - 20 and 36 Litre Cross Beam Press
£15.00

A replacement pawl for the 20 and 36 Litre Cross Beam Press ratchet mechanisms.

Out of stock
Handle for 20 and 36 Litre Cross Beam Press
£18.50

A replacement handle compatible with both our 20 and 36 Litre Cross Beam presses. Used to help operate the pressing mechanism.

Out of stock
Bearing Plate and Wooden Block for 20 and 36 Litre Cross Beam Press
£31.50

A replacement bearing plate, complete with solid beechwood block and brass disc. Compatible with both our 20 and 36 Litre Cross Bream presses.

In stock
+ −
Pressure Disc for 20 and 36 Litre Cross Beam Press
£37.99

A replacement pressure disc compatible with both our 20 and 36 Litre Cross Beam Presses. As their press cages have the same diameter the disc is a perfect for for both.

Out of stock
Assembled Pressure Plate for 20 and 36 Litre Cross Beam Press
£75.00

A complete pressure plate assembly compatible with both our 20 and 36 Litre Cross Beam Presses. Includes carry handles for ease of transport and positioning.

In stock
+ −
Spindle Set for 20 and 36 Litre Cross Beam Press
£81.00

A complete replacement for the spindle mechanism in both our 20 and 36 Litre Cross Beam presses, so this will work with both. 

In stock
+ −
Leg for 20 and 36 Litre Cross Beam Press (Set of 4)
£31.50

A complete set of 4 replacement legs, compatible with both our 20 and 36 Litre Cross Beam presses. Constructed from solid, durable cast iron.

In stock
+ −
Top Beam for 20 and 36 Litre Cross Beam Press
£115.00

A replacement top beam component compatible with both our 20 and 36 Litre Cross Beam presses.

Out of stock
Handles for 20 and 36 Litre Cross Beam Press
£12.50

A spare set of carry handles that attach to the pressure plate of both our 20 and 36 Litre Cross Beam Presses. Also compatible with our Pack Press.

Out of stock
Tray for 20 and 36 Litre Cross Beam Press
£75.00

A spare juice collection tray compatible with both our 20 and 36 Litre Cross Beam presses. Made from food grade stainless steel.

In stock
+ −
Brass Disc for 20 and 36 Litre Cross Beam Press Bearing Plate
£15.00

A replacement brass disc that pairs with the bearing plate of our 20 and 36 Litre Cross Beam presses to accept the spindle mechanism.

In stock
+ −
Cage for 36 Litre Cross Beam Press
£200.00

A complete replacement pressing cage for our 36 Litre Cross Beam Press. Constructed from solid, sustainably sourced beechwood staved and girded by robust cast iron hoops.

Out of stock
Cage for 20 Litre Cross Beam Press
£99.99

A complete replacement pressing cage for our 20 Litre Cross Beam Press. Constructed from solid, sustainably sourced beechwood staved and girded by robust cast iron hoops.

In stock
+ −
41cm Square Acacia Rack for Pack Press
£60.00

A single acacia wood rack for use with the pack press.

In stock
+ −
Spindle Set for Pack Press
£112.00

A replacement for the spindle component of the Pack Press.

In stock
+ −
Pawl for Ratchet - Pack Press
£15.00

A replacement pawl for the ratchet mechanism of the Pack Press.

In stock
+ −
Bearing Plate for Pack Press with Brass Insert
£31.50

A replacement bearing plate complete with solid brass insert to accept the spindle mechanism of our Pack Press.

In stock
+ −
Bearing Block with Plate and Insert for Pack Press
£50.00

A complete bearing block assembly with cast iron plate and brass insert, compatible with our Pack Press.

In stock
+ −
Leg for Pack Press (Set of 4)
£31.50

A complete set of 4 replacement legs, compatible with the Pack Press. Complete with all attachment screws required.

In stock
+ −
Former for Pack Press
£37.99

A replacement former for the Pack Press. Used to build the pomace cheeses that are sandwiched between acacia racks to be pressed.

In stock
+ −
Tray for Pack Press
£119.00

A replacement juice collection tray, compatible with our Pack Press. Made from food grade stainless steel.

In stock
+ −
Pressure Plate for Pack Press
£112.00

A replacement pressure block for the Pack Press. This is a solid, heavy duty wooden plate made from sustainably sourced beech.

In stock
+ −
Top Beam for Pack Press
£119.00

A replacement for the top cross beam component of our Pack Press.

In stock
+ −
Handle for Pack Press
£18.50

A replacement handle for the Pack Press. For easier operation of the pressing mechanism. Made from solid stainless steel.

In stock
+ −
Hydropress Sack
£48.00

A spare press bag for the Speidel hydropress. Available in 20, 40 and 90 litre sizes.

In stock
 
Select a Variation
Tightening Nut for 20 & 40 Litre Hydropress
£25.00

A replacement tightening nut compatible with the 20 litre and 40 litre Speidel hydropresses. Used to secure the lid and keep it in place while pressing.

Out of stock
 Prev
1 2 3 4 5
Next