Catalogue
Orange plastic tap 1/2" BSP fitting (complete with back nut) with tap suitable for 1/2" hose
Hose, connection for ¼" thread
Speidel 2 chamber airlock and acrylic bung suitable for Speidel stainless steel tanks with an upward DN50 vent and a capacity up to 10,000 litres and a diameter between 550mm and 2,000mm.
Replacement Speidel ball valve (BSP) suitable for 20 litre, 40 litre and 90 litre hydropresses - male / male ends.
Powerful Speidel flat immersion heater. Can heat freshly pressed fruit juice to 85-90°C and can be stored in the same container without decanting it.
Variable capacity stainless steel tanks from Speidel. Available in three sizes (65 litres, 110 litres and 170 litres).
A drain valve perfect for use with stainless steel tanks.
Speidel’s variable capacity tanks (FO1) always adapt to the amount of liquid they contain. The floating lid ensures that air does not spoil your liquid preventing any oxidation. They can be used as storage tanks or fermentation tanks.
Stainless steel storage rack for flat bottomed 'BO' Speidel tanks (also compatible with 'BD' and 'UF' tanks made by Speidel). This allows you to set the tank at a more comfortable and workable height.
Height of base: 404mm
Ball valve tap (male to male) BSP suitable for 60 & 120 litre fermentation tanks.
A cleaning brush specifically designed for use with the Speidel range of pressure casks.
This gas cylinder from Speidel contains 2 kg of carbon dioxide, enough to carbonate up to 50 litres of liquid.
Variable capacity stainless steel tanks from Speidel, complete with an immersion heater. There are 2 sizes available; 65 and 110 litres, so you can scale to the size of your operation.
Compatible with the Speidel pressure barrel. Working pressure up to 10 bar.
Replacement tap for 5 gallon brown plastic barrel.
A Speidel stainless steel tank with an inner float lid and air pump with pressure gauge, allowing the tank to be airtight regardless of how full it is. Available in 110, 220, 290 and 650 litre capacities.
A 5 litre PET plastic demijohn, complete with a cap and grommet. These are a perfect low cost solution for fermenting smaller batches of wine or cider.
A single 1 gallon glass demijohn, suitable for the fermentation and storage of cider and wine.
A Fermentation Egg from Speidel. These amphorae vessels are specially designed to mimic fermentation techniques used since ancient times and the egg shape gives a much smoother and more complete fermentation by allowing more free circulation inside. Available in 60, 250 and 600 litre sizes.
Oversized rubber bung with bore from Speidel.
A grommet for use with an airlock and fermenter to allow for the safe and steady release of CO2 during fermentation.
10 X solid (un-bored) rubber bungs, 32/27mm diameter X 32mm length.
A cork for use with demijohns, carboys and fermenters.
Speidel's GÄRSPUNDmobil fermentation monitor, which allows you to monitor the progress of your fermentation remotely.
A box of 10 CO2 cartridges, ideal for use with pressure barrels or carbonating homebrew.
A complete gas injection system for use with 2 and 5 gallon barrels.
A large airlock cylinder compatible with the Speidel range of fermentation tanks. For use with oversized compound bungs (part no 35506).
An oversized bung designed to fit the Speidel range of fermentation tanks. Compatible with Large Airlock Cylinder (part no. 28201).
6 chamber plastic airlock for use with bored rubber bungs. Works with all standard fermenters.
A 32 X 28mm rubber bung with an 8mm bore. compatible with standard 6 chamber bubbler airlocks.
A plastic adaptor designed to allow you to use an airlock and bung with any flat topped tank.
A food grade polyethylene cap to fit bottom outlet of 12, 20, 30, 60, 100 & 200, 300 and 500 litre Speidel fermenters.
A ball valve perfect for use with stainless steel tanks.
Orange plastic tap 3/4" BSP fitting (complete with back nut) with tap suitable for 1/2" hose
An AISI 316 food grade stainless steel 3/4" ball valve.
An AISI 316 food grade stainless steel ball valve.
A universal tap perfect for all fermenters. Comes with built in sediment reducer.
A stainless steel dispensing tap compatible with the Speidel plastic range of fermentation tanks.
A replacement tap to fit plastic Speidel tanks of 60, 100 and 200 litre capacity.
A replacement tap to fit the 12, 20 and 30 litre plastic Speidel tanks.
A 50 litre capacity pressure container from Speidel. Manufactured in Germany from premium materials, these barrels allow you to store your own drinks and keep them fresh for months at a time without the need for chemical preservatives.
A Speidel FD tank, available in sizes from 100-625 litres. These are manufactured in Germany and supplied to order, so please do call ahead with your requirements and we will be happy to help!
A Speidel stainless steel universal container, perfect for the fermentation and storage of a wide variety of liquids. Sizes from 15L - 120L available. This also comes with a clamping ring lid with silicon seal, drain pipe with 3/4" female thread and plastic blind plug and a plastic threaded connector with blanking cap for airlock.
A 5 litre food grade fermentation bucket and lid. The lid is airtight and supplied undrilled.
A 10 litre food grade fermentation bucket and lid. The lid is airtight and supplied undrilled.
What’s included? A 15 litre food grade fermentation bucket and lid. The lid is airtight and supplied undrilled.