Catalogue
Variable capacity stainless steel tanks from Speidel. Available in three sizes (65 litres, 110 litres and 170 litres).
Locking nut for top lid of Speidel 90 litre Hydropress.
Replacement motor for the Speidel Mill.
A complete kit for dispensing your own homebrew drinks that's perfect for parties, BBQs and summer gatherings!
A replacement lid, complete with insert and O-ring seal, compatible with 60 to 500 Litre Speidel fermenters
Powerful Speidel flat immersion heater. Can heat freshly pressed fruit juice to 85-90°C and can be stored in the same container without decanting it.
A cleaning brush specifically designed for use with the Speidel range of pressure casks.
A replacement tightening nut compatible with the 20 litre and 40 litre Speidel hydropresses. Used to secure the lid and keep it in place while pressing.
Armature that fits both the 20 & 40 litre Speidel Hydropresses
Medically pure, food safe petroleum jelly, ideal for use as a lubricant for variable capacity tanks, kegs, etc.
A replacement bearing compatible with the Speidel Mill. Part code 62052RS.
A replacement dome nut for the Speidel Mill. Attaches the pre crusher blade to the mounting plate and the cutting blades.
A replacement lid including black plastic ring and O-ring seal for the 60 & 120 Litre Speidel barrel.
A nitrile V ring seal, compatible with the Speidel Mill.
A single flat cutting knife for the Speidel Mill. These are reversible so when one side of the blade is dulled or blunted they can be turned around to essentially double their lifespan.
A set of replacement pre crusher blades for the incredibly powerful Speidel Mill.
A replacement lid, complete with insert and O-ring seal, compatible with 20 and 30 Litre Speidel fermenters
A spare splash cover to minimise mess when using the Speidel hydropress. Available in 20 and 40 litre sizes.
A 6m long power cable with a moulded plug and a 13A fuse. This will allow you to run the Speidel Mill from a UK mains power supply.
This gas cylinder from Speidel contains 2 kg of carbon dioxide, enough to carbonate up to 50 litres of liquid.
A replacement seal to fit the lids of plastic Speidel fermenters ranging from 60 to 500 litres in capacity.
A complete replacement hopper for the Speidel Mill. Made entirely from heavy duty, food grade plastic.
Hose, connection for ¼" thread
Stainless steel storage rack for flat bottomed 'BO' Speidel tanks (also compatible with 'BD' and 'UF' tanks made by Speidel). This allows you to set the tank at a more comfortable and workable height.
Height of base: 404mm
A drain valve perfect for use with stainless steel tanks.
Speidel's GÄRSPUNDmobil fermentation monitor, which allows you to monitor the progress of your fermentation remotely.
A 60 litre capacity plastic barrel from Speidel. These are ideal for both the fermentation and storage of wine and cider. Also suitable for storing other liquids. Supplied with outlet blanking cap.
A replacement rubber lid seal for the Speidel 30 litre fermentation tank. 120 X 4mm.
A complete kit to connect your Speidel tanks to one of our stainless steel fillers for gravity filling of your bottles.
A plastic adaptor designed to allow you to use an airlock and bung with any flat topped tank.
Replacement Speidel ball valve (BSP) suitable for 20 litre, 40 litre and 90 litre hydropresses - male / male ends.
Speidel’s variable capacity tanks (FO1) always adapt to the amount of liquid they contain. The floating lid ensures that air does not spoil your liquid preventing any oxidation. They can be used as storage tanks or fermentation tanks.
A 50 litre capacity pressure container from Speidel. Manufactured in Germany from premium materials, these barrels allow you to store your own drinks and keep them fresh for months at a time without the need for chemical preservatives.
A complete replacement for the bladder of the Speidel hydropress. Available in 3 sizes: 20, 40 and 90 litres.
A spare press bag for the Speidel hydropress. Available in 20, 40 and 90 litre sizes.
A 120 litre capacity plastic barrel from Speidel. These are ideal for both the fermentation and storage of wine and cider. Also suitable for storing other liquids. Supplied with outlet blanking cap.
A large airlock cylinder compatible with the Speidel range of fermentation tanks. For use with oversized compound bungs (part no 35506).
A 500 litre fermentation tank made from food grade polyethylene, suitable for fermenting and storing beer, wine, cider and more. Comes with a large airlock compatible with all plastic Speidel tanks and a dispensing tap.
A 20 litre hydropress from the world renowned Speidel. Also included is a GEKA ¾” internal thread hosepipe adapter with 1 metre of hose tubing, splash guard, straining bag and full operation and setup instructions.
A 300 litre fermentation tank made from food grade polyethylene, suitable for fermenting and storing beer, wine, cider and more. Comes with a large airlock compatible with all plastic Speidel tanks and a dispensing tap.
Variable capacity stainless steel tanks from Speidel, complete with an immersion heater. There are 2 sizes available; 65 and 110 litres, so you can scale to the size of your operation.
A conveniently sized 12 litre tank from Speidel. Also included is a carry handle, airlock and bung.
A 200 litre fermentation tank made from food grade polyethylene, suitable for fermenting and storing beer, wine, cider and more. Comes with a large airlock compatible with all plastic Speidel tanks and a dispensing tap.
A Speidel FD tank, available in sizes from 100-625 litres. These are manufactured in Germany and supplied to order, so please do call ahead with your requirements and we will be happy to help!
60 litre superior fermentation tank made from food grade polyethylene. Ideal for fermenting and storing beer, wine, cider and more. Complete with a airlock, bung and dispensing tap - compatible with all plastic Speidel tanks.
A Speidel stainless steel universal container, perfect for the fermentation and storage of a wide variety of liquids. Sizes from 15L - 120L available. This also comes with a clamping ring lid with silicon seal, drain pipe with 3/4" female thread and plastic blind plug and a plastic threaded connector with blanking cap for airlock.
A 40 litre hydropress from the world renowned Speidel. Also included is a GEKA ¾” internal thread hosepipe adapter with 1 metre of hose tubing, splash guard, straining bag and full operation and setup instructions.
A Fermentation Egg from Speidel. These amphorae vessels are specially designed to mimic fermentation techniques used since ancient times and the egg shape gives a much smoother and more complete fermentation by allowing more free circulation inside. Available in 60, 250 and 600 litre sizes.